Table of Contents
Advertisement
iPod
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
Press Eco Power/STANDBY-ON 2 or
SOURCE on the main set.
➜
The system will switch to the last selected
source.
●
Press CD, iPod, FM, or USB/AUX on the
remote control.
➜
The system will switch to the selected source.
Switching the system to Eco
Power Standby mode
●
Press Eco Power/STANDBY-ON 2 in the
active mode.
➜
The backlight of clock display is dim in
standby.
●
The volume level(up to a maximum volume level
of 12) interactive sound settings, last selected
mode, source and tuner presets will be retained
in the player's memory.
●
To view the clock time in Standby mode, press
and hold Eco Power/STANDBY-ON 2 for
3 seconds or more.
➜
The system enters the normal standby mode
with clock display.
➜
If the clock has not been set, "--:--" is
displayed.
●
Press and hold Eco Power/STANDBY-ON
2 for 3 seconds or more to go back to Eco
Power Standby mode.
3 9 8 D
Basic Functions
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Volume control
Adjust VOLUME -/+ (VOL + / -) to increase
or decrease the volume level.
➜
Display shows the volume level "VOL" and a
number from 1-31. "MIN" denotes the minimum
volume level and "MAX" denotes the maximum
volume level.
To switch off the volume temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
"MUTE" is displayed.
●
To restore the volume, press MUTE again or
increase/decrease the volume level.
Sound control
●
Press DSC repeatedly to select the desired
sound effect : POP, JAZZ, CLASSIC or ROCK.
●
Press DBB to switch on or off the bass
enhancement.
➜
If the DBB is activated,
briefly..
➜
If the DBB is deactivated,
briefly.
is shown
o
DBB
N
is shown
o
DBB
FF
11
Advertisement
Table of Contents
Troubleshooting
