Summit Solo Deluxe Manual page 7

GUNREST
1. Slide the Gunrest Bar onto the Left and Right Gunrest Arms as
shown in figure 19.
2. Secure the Gunrest Bar using two
figure 20. The Wire Lock Pins allow adjustment of the Gunrest Bar by
sliding it in or out.
3. Insert two of the Rubber Gunrest Bumpers
holes on each Armrest (see figure 21). Insert by pushing while
twisting slightly.
4. Each Gunrest Arm has a tab with a pre-drilled hole. Line up
these holes with the holes in the Armrests. Insert two
between the Gunrest tab and Armrest hole (figure 22).
5. Use two 1 3/4" bolts with lock nuts
armrest (see figure 23.)
6. Position the Gunrest Pad as shown in figure 24. Secure by
wrapping the pad around the bar and using the hook and loop strip
to secure.
1/4" WIRE LOCK PINS
1 3/4" BOLT, LOCK NUT -
WRENCH TIGHTEN
23
1/4" Wire Lock Pins
into the pre-drilled
1/4" Bushings
to secure the bar to the
20
22
BUSHINGS
as shown in
RIGHT
GUNREST ARM
(PN 82068.550)
DO NOT use the Gun Rest Bar as a hand hold while
climbing into our out of this stand.
GUNREST
PAD
(PN 82068.855)
GUNREST
BAR
(PN 82068.600)
LEFT
GUNREST
ARM
(PN 82068.500)
RUBBER
GUNREST
BUMPERS
CAUTION
!
19
21
24
PG 7