Summit Solo Deluxe Manual page 4

SEAT SUPPORT
1. Position the Left and Right Upright
arms and the Yoke as shown in figure
4. Please note the correct orientation.
The Upright arms should bend in at the
middle and the teeth on the yoke should
face down.
2. Slide the Upright arms onto the Yoke
and line up the bolt holes.
3. Position the two Armrest bars as
shown in figure 5. Note the correct
orientation of the Armrests.
4. Secure the Armrests to the Upright
tube / Yoke using two, 2 1/4" bolts and
lock nuts per side. (see figure 6)
5
ARMREST
(PN 82068.300)
BOLT HOLE FOR
GUNREST
NOTICE
Summit recommends the use of the SOP Climbing
System Accessory with all ladder and hang-on
treestands. For more information please visit our
website www.summitstands.com or by calling 256-
353-0634.
PG 4
ARMREST
(PN 82068.300)
BOLT HOLE FOR
GUNREST
LEFT UPRIGHT
(PN 82068.010)
RIGHT UPRIGHT
(PN 82068.020)
YOKE
(PN 82068.200)
2 1/4" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
6
4
www.summitstands.com