Table of Contents
Advertisement
Basic Functions
Switching the system on
●
Press STANDBY ON or SOURCE (or 2on
the remote control).
➜
The system will switch to the last selected
source.
●
Press CD, USB, FM or AUX on the remote
control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY ON on the system (or 2on
the remote control).
➜
The display displays clock time, or --: -- is
displayed if clock time is not set.
➜
The volume level (up to a maximum volume
level of 12 and up to a minimum level of 4),
interactive sound settings, last selected source
and tuner presets will be retained in the player's
memory.
To switch the system to Eco-power
standby mode
● Press and hold STANDBY ON (y on the
remote control) for more than 2 seconds.
➜
The display will go blank.
➜
The Eco power light will be on.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD/USB playback
has ended and no control is operated.
14
Adjusting volume and sound
1
Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOL -/+ on the remote
control).
➜
Display shows the volume level VOL and a
number from 1-31.
2
Press DSC repeatedly to select the desired
sound effect: POP / JAZZ / CLASSIC / ROCK.
3
Press DBB to switch bass enhancement on or
off.
➜
Display shows
4
Press LOUD on the remote control to enable/
disable LOUDNESS feature.
●
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
5
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
if the DBB is activated.
Advertisement
Table of Contents
