Waterpik WP-800 Series Quick Start Manual
Water flosser
Hide thumbs
Also See for WP-800 Series:
- Manual (113 pages) ,
- Instruction manual (30 pages) ,
- Manual (24 pages)
Advertisement
Quick Links
QUICK START GUIDE
WP-800 Series
1
First Use
This device is only compatible with voltages of 100-240VAC, 50/60Hz
Fill
Fill reservoir with
warm water and
replace it firmly
on the base.
Power
ON
High
Turn pressure to HIGH, point tip
into sink, turn power and water
switches ON until water flows.
Turn OFF.
Insert tip firmly
until it clicks
into place.
©2019 Water Pik, Inc.
Advertisement
Related Manuals for Waterpik WP-800 Series
Summary of Contents for Waterpik WP-800 Series
- Page 1 QUICK START GUIDE WP-800 Series First Use Fill Insert tip firmly until it clicks into place. Fill reservoir with warm water and replace it firmly on the base. Power High Turn pressure to HIGH, point tip into sink, turn power and water switches ON until water flows.
- Page 2 QUICK START GUIDE WP-800 Series Water Floss Lean over sink. Close lips Turn pressure to low. With enough to prevent splashing, water switch in OFF position, while still allowing water to place tip in mouth. Turn Power flow from mouth into sink.