Hook up your system
Desk phone setup details
Using the diagram, connect your headset system.
plantronics.com/software
Plantronics Hub for Windows/Mac
Choose a desk phone setup
A, B, C or D
A
Desk phone with dedicated headset
• Connect one end of the telephone interface cable to the back of the base
• Connect the other end of the telephone interface cable into the dedicated headset
the desk phone
• Adjust the configuration switch on the bottom of the base to default A, which works for most
phones. Use configuration
NOTE
Use this setup if you are not using the HL10 lifter or EHS cable. In this configuration, press
both the headset button on your desk phone and the call control button on the headset to
answer or end calls.
B
Desk phone (standard)
HEADSET PORT
OR
NO HEADSET PORT
NO HEADSET PORT
and connect cables.
port
USE
D
for Cisco phones.
HEADSET PORT
OR
port on
5