BOTTOM BOARD
RESISTORS
Start with the bottom board parts. First of all, take your time and check the v alues of all r esistors
using a multimeter
2
(or you can check the color codes if you are seasoned enough):
-
470R (4x), 1 k (3x), 4 k7 (1x), 2 2k (1x), 6 8k (1x), 1 00k (30x), 1 50k (1x), 2 70k (1x), 3 30k (2x),
680k (1x), 2 M2 (1x).
Then solder them on the bottom PCB and snip the leads close to the PCB (be sure to make this step
on all remaining leads in the course of this guide).
2
h ttps://learn.sparkfun.com/tutorials/how-to-use-a-multimeter/measuring-resistance
5