Technicolor TG789vac V2 How To Set Up page 3

4. If you wish to connect a device hardwired, you will need to use the Yellow Ethernet
Lead provided with the router and connect it to one of the 4 ETH ports available.
5) Once all of the cables have been connected, you are now able to switch on the power
on the router, leave the router for 10-15 minutes and once all of the lights are on like
shown below, you are able to start using your broadband with Call Flow.
Please Note:
1) The Red Ethernet
2) It is recommended that for your main computer you use the main Ethernet port which
is labelled ETH1.
port labelled WAN should not be used