Ricoh A850 Operating Instructions Manual page 87

If the NetBEUI protocol is not installed, click [Install] on the [General] tab
and install it. For more information about installing the NetBEUI protocol,
see Windows 2000 Help.
NetWare configuration
Setting up a client computer
This section describes how to set up a client computer when you use a Net-
Ware print server.
In the operating manual, read each functional element as that of Windows
2000.
For information, see the descriptions of Windows NT 4.0 in "Setting up a Cli-
ent Computer" in the manual that comes with this machine.
In that procedure, substitute the following.
• A [Network Neighborhood] ⇒ [My Network Places].
Standard TCP/IP port configuration
Standard TCP/IP is a standard port of Windows 2000 to enable Peer-to-Peer
printing in a network environment.
For more information about Standard TCP/IP settings, see Windows 2000 Help.
LPR port configuration
For information about Configuring LPR Port Printing, see Windows 2000 Help.
Windows 2000 Configuration
Draft 2000/04/28
17