For more information about installing the printer driver as an alternate driver,
see the description of Windows 2000 in"Installing the PCL 6/5e Printer Driver" ⇒
P.10
and the description of Windows NT 4.0 in"Installing the PCL 6/5e Printer Driver"
⇒ P.5
Installing the printer driver by Auto Run
Follow these steps to install the printer driver on Windows 95/98/Windows
2000/Windows NT 4.0.
Important
Never have two versions of the same printer driver installed on your system
at the same time. When upgrading to a new version of the printer driver, un-
install the old version, and then install the new one.
Note
If the "plug and play" function is started by Auto Run, click [Cancel] in the
[New Hardware Found] dialog box or [Device Driver Wizard], and then insert the
CD-ROM. [New Hardware Found] or [Device Driver Wizard] appears depending on
the system version of Windows 95/98 and Windows 2000.
A
Close all applications that are currently running.
B
Insert the CD-ROM into the CD-ROM drive.
C
Follow the instructions on the screen.
D
Restart your computer after installation is complete.
E
Set up the Accessories with the printer driver.
Installing the software and utilities by Auto Run
You can install the following software and utilities that are included on the CD-
ROM labeled "Printer Drivers and Utilities" by using Auto Run.
• PRINTER MANAGER FOR ADMIN
• PRINTER MANAGER FOR CLIENT
*2
• Font Manager
*1
For the name of PRINTER MANAGER FOR ADMIN/FOR CLIENT, see the "Oper-
ating Instructions". See PRINTER MANAGER FOR ADMIN/FOR CLIENT Online
Help for details on using PRINTER MANAGER FOR ADMIN/FOR CLIENT.
*2
See Font Manager Help for details on using the Font Manager.
Installing the Printer Driver and Software
*1
*1
3
Draft 2000/04/28