Technical Data; Identification; Dimensions Sensor - ELGO Electronic PMIX Series Operating Manual

4 Technical Data

4.1

Identification

The type label serves for the identification of the unit. It is located on the housing of the sensor and gives the
exact type designation ( 8) with the corresponding part number. Furthermore, the type label contains a
unique, traceable device number. When corresponding with ELGO please always indicate this data.
4.2

Dimensions Sensor

min.2
measuring distance
swivel head SAKB5F
Note: The swivel head „SAKB5F"shown in the drawing above is an accessorial part (see op-
tion M1 and M2 in the type designation  8). With M0 standard versions the scope of deliv-
ery includes always 4 holding plates as mounting parts (see also above).
60 + measuring distance
holding plate
- 9 -
Technical Data