Table of Contents
Advertisement
3.4
Measuring Systems and Resolutions
The PMIX resolution is depending on the selected basis measuring system (see type designation 8).
The following table will show all available versions.
Table 1: Measuring Systems and Resolutions
Measuring System
LMIX
EMIX
EMIX23
IZ14E/15E/16E/17E
3.5
Power Supply Voltages and Output Levels
For the LMIX and EMIX based versions, the following combinations are available:
1.
Order suffix 00* = 10 ... 30 VDC power supply / output levels 10 ... 30 V-HTL
2.
Order suffix 01* = 10 ... 30 VDC power supply / output levels 5 V-TTL line driver
3.
Order suffix 11* =
* Order suffix (see type designation 8)
Note: To reach the largest possible interference distance it is recommended to supply the
PMIX linear encoder with 10 ... 30 VDC and to select the A/B signals 5 V-TTL-compatible
with differential evaluation.
3.6
Pulse diagram
A
A'
B
B'
Z
Z'
Figure 2: Output pulse diagram
Resolution
0.1 mm at single edge triggering
0.025 mm at four edge triggering
0.01 mm at four edge triggering
0.001 mm at four edge triggering
0.01 mm / 0.1 mm (einstellbar via Parameter)
5 VDC power supply / output levels 5 V-TTL line driver
Magnetic tape pole pitch
5 mm
2 mm
2 mm
2.5 mm
Channel A and B are
phase shifted by 90°
The index pulse output is
periodically every 2 mm (EMIX)
resp. 5 mm (LMIX)
- 8 -
Product Features
Advertisement
Table of Contents
