Huawei SmartLi User Manual page 44

SmartLi
User Manual

Install copper bars between the battery modules, and then install cables between the
battery modules and the battery management module.

Connect the round hole of the copper bar to the upper battery module, and then connect
the waist hole of the copper bar to the lower battery module.

After the copper bar on each terminal is secured, reinstall the protective cover on the
terminal.

Battery cables are preinstalled inside the cabinet.

Excessive bolts will be used as spare parts.
Figure 3-22 Installing copper bars and cables
Step 6 Reinstall the battery management module.
Issue 04 (2019-09-16) Copyright © Huawei Technologies Co., Ltd.
3 Installation
37