Intex ECO15230-2 Owner's Manual page 20

220-230 v, 50 hz, 300 w/520 w, hmax 5 m hmin 0.19 m ipx4 max. water temperature 35 degrees c
Table of Contents

Advertisement

OPERATING INSTRUCTIONS (continued)
Set operating hours for BOOST:
1.
Press
button to unlock the keypad. With LED
button
to set the desired operating hours.
48 hours, 60 hours and 00 (OFF). Keep
the cycle.
2.
With the desired hour value showing, press
keypad controls.
The BOOST indicator light is up when activated. The
system is now starting E.C.O. and more chlorine sanitizer production. After boost procedure
has been completed, the system will automatically switch to the normal working mode.
NOTE: If you forget to lock the keypad controls, the system will automatically lock it and start
working 10 seconds later.
3.
Operating the system in this mode will automatically activate the pump and chlorinator, the
LED will always display the remaining
keypad and press
4.
To cancel the boost cycle,
and reset the hour to
"00".
Set
electrode Self-Clean cycle time:
The default self-clean
cycle time is
1.
Press
button to unlock the keypad and the LED display is
flashing.
Depending on your pool water calcium hardness level, press
button to select the self-clean cycle time as below. Total of 3
settings: 14 hours, 10 hours and 06 hours.
Calcium Hardness
0 - 150 ppm
150 - 250 ppm
250 - 350 ppm
2.
With the desired hour value showing, press
system will reverse the polarity of the electrode (48) every time according to the selected
hours.
NOTE: If you forget to lock the keypad controls, the system will automatically lock it and start
working 10 seconds later.
SAVE THESE INSTRUCTIONS
(345IO) SAND FILTER PUMP COMBO ENGLISH 7.5" X 10.3" PANTONE 295U 07/10/2019
Total of 4 settings: 36 hours,
pressing
operating hours of the
button to review the programmed boost operating hours.
press
button to unlock the keypad, then press
14 hours.
To adjust
Self-clean cycle time
Reverse polarity every 14 hours
Reverse polarity every 10 hours
Reverse polarity every 06 hours
flashing,
press
button to repeat
button to lock the
pump. You need to unlock the
the self-clean cycle time:
button to lock the keypad controls.
English
345A
button
The
Page 20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eco20230-2Eco15220-2Eco20220-2

Table of Contents