Recommended Connection Diagram; Quick Start - Ebyte E103-W01-IPX User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

4 Recommended connection diagram


Note：supply voltage is 3.0V~3.6V. 300mA LDO is recommended for steady operation of module.

5 Quick Start

 E103-W01-IPX module is easy to use. In order to allow users to quickly familiarize themselves with the module, this
section will guide the user through simple setup to achieve configuration and communication in various modes.
 The test process uses AT commands. For quick connection, we have developed quick configuration software for users.
 This section of the test uses the configuration software to operate, the module will echo the currently issued
instructions, so that users can quickly understand the usage of the AT command (Note: you need to add a line break
after each AT command).
 Of course, after the user is familiar with the AT command, the AT command can be manually sent using the serial
debugging assistant without using the configuration software. It is also possible to use an external controller (MCU)
to directly connect to the module UART for AT command communication without using the backplane.
Hardware：
1 E103-W01*1
2 E103-W01 baseboard*1
Copyright ©2012–2018，成都亿佰特电子科技有限公司
E103-W01-IPX User Manual
6