Chengdu Ebyte Electronic Technology Co.,Ltd.
Output
8
AUX
9
VCC
Reference
10
GND
place
Reference
11
GND
place
12~19
NC
Reference
20
GND
place
4 Recommended connection diagram
Serial number
1
2
Copyright ©2012–2021,Chengdu Ebyte Electronic Technology Co.,Ltd.
Used to indicate the working status of the module, the user wakes up the external MCU, and outputs
low level during the power-on self-check initialization period. It can be configured as an open-drain
output or push-pull output. For details, see parameter settings (can be left floating)
Module power supply positive reference, voltage range: 2.3V ~ 5.5V DC
Module ground
Module ground
Empty feet not connected
Module ground
Brief description of the connection between the module and the microcontroller (the picture above takes the
STM8L microcontroller as an example)
The wireless serial port module is TTL level, please connect with TTL level MCU.
For some 5V microcontrollers, it may be necessary to add 4-10K pull-up resistors to the TXD and AUX pins
of the module.
E280-2G4T12S User Manual
8