Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
4 Recommended Connection Diagram
A brief description of the connection between the module and the microcontroller (the above figure takes
No
1
The wireless serial port module is TTL level, please connect it with TTL level MCU .
For some 5V microcontrollers, it may be necessary to add 4 ~ 10K pull-up resistors to the TXD and
2
AUX pins of the module.
It is recommended to add a TVS diode before the power supply of the E22-230/400T33E module to
3
prevent the instantaneous voltage from being too high, thus burning the chip.
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
the STM8L microcontroller as an example)
E22-xxxTxxE User Manual
8
Advertisement
Table of Contents
