List Of Markers And Words; List Of Markers - HEIDENHAIN TNC 370 D Technical Information

5

List of Markers and Words

5.1 List of Markers

Marker
M4000 Spindle in position
M4001 Nominal speed command signal of the spindle not in the ramp
M4002 Nominal speed command signal of the spindle = zero
M4003 Nominal speed output analog or digital
M4004 Illegal rotational speed
M4005 Status display and nominal speed value output for M03
M4006 Status display and nominal speed value output for M04
M4007 Status display for M05 and spindle stop
M4008 Disable speed output for spindle
M4009 Spindle rotation counterclockwise (for gear change)
M4010 Spindle rotation clockwise (for gear change)
M4011 Activate rotational speed MP3520.0 and direction of rotation from
M4013
M4012 Open the spindle control loop
M4013 Direction for spindle orientation
0 = M03
1 = M04
M4014 Reverse the direction of spindle rotation
M4015 Renewed evaluation of the spindle reference mark
M4016 Cycle 13 is executed
M4017 Controlled spindle in motion
M4018 Reference mark for spindle not yet traversed
M4030 Cycle 2 or Cycle 17 active
M4031 Cycle 17 or Cycle 18 active
M4040 Status display M07, M08, M09 highlighted
M4041 Status display M07, M08, M09 and MK
M4042 Status display M07, M08, M09 and MK
M4050 Touch probe not ready (ready signal is missing)
M4051 Stylus deflected before start of probing cycle
M4052 Stylus deflected (probing process not executed)
M4053 Probing sequence ended or interrupted
July 02
Spindle
Thread Cutting
Coolant Status
Touch Probe
List of Markers and Words
S R
NC NC
NC NC
NC NC
NC NC
NC NC
PLC PLC
PLC PLC
PLC PLC
PLC PLC
PLC PLC
PLC PLC
PLC PLC
PLC PLC
PLC PLC
PLC PLC
PLC NC
NC PLC
NC NC
NC NC
NC NC
NC NC
PLC PLC
PLC PLC
PLC PLC
NC NC
NC NC
NC PLC
NC NC
TNC 370 D 5–81