Table of Contents
Advertisement
STORING THE MOWER
The following steps should be taken in order to prepare the lawn mower for storage.
1. Remove the battery pack from the mower and store it at room temperature in a dry location.
2. Clean the mower as described earlier in the maintenance section.
3. Inspect the blade and replace it or sharpen it if required.
4. Lubricate the mower.
5. Store the mower in a dry, clean location. Do not store it next to corrosive materials, such as fertilizer or rock salt.
6. Store the mower in a covered, enclosed space, that is cool and dry and out of the reach of children.
7. Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap moisture around the mower, which
causes rust and corrosion.
The handle assembly can be folded away completely for storage:
1. Remove the grass bag.
2. Move the cutting-height adjustment lever toward the front and engage it in the lowest setting (setting 1).
3. Open the handle-locking clamps and fully recess the side
rails to the compact position.
4. Press and hold the quick-adjust lever with your right hand
to release the handle. Gently pivot the handle toward the
front of the mower; release the quick-adjust lever and
continue to pivot the handle until you hear and feel the lock
pin engage in the locked storage position.
5. Store the mower upright or flat (Fig. 37a & Fig. 37b).
WARNING: If the mower to tips over from the upright position,
mower damage or personal injury may result. Always keep the
mower stable and out of the reach of children when it is in the
upright position. If possible, lay it flat for storage.
37a
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP & LM2100
37b
33
Advertisement
Table of Contents
