Aerohive AP120 Hardware Reference Manual page 59

Figure 8 Attaching the AP340 to the mounting plate
3
Align the V-shaped tabs on the
mounting bracket with the tab
slots on the bottom of the AP.
Insert the V-shaped tabs into the tab
slots until they click into place.
4
Attach external antennas, if
they are required. (The AP shown
here uses internal antennas.)
4. Remove the ceiling tile next to the area where you want to mount the device.
5. Press the hanger frame downward into place on the ceiling track until the claws on each leg grips the
track below the top ridge (see
Figure 9 Clipping the hanger frame onto the track
Hardware Reference Guide
Mounting plate
V-shaped tab
Tab slot
Figure 9).
Hanger frame
4
Remove the ceiling tile and
enter the plenum.
5
Press the hanger frame onto
the ceiling track.
M
OUNTING THE
Hanger clip
V-shaped tab
Tab slot
AP340
57