Geca Tecno Control Unico Programming Instructions And Installation Manual page 8

perature) or T1 (economy temperature). On the display centre can be
visualized, alternately, pressing the key "°C/h" the present hour or the
room temperature. On this key two letters indicate the week day (" LU"
for Monday, "MA" for Tuesday, and so on). Lower it is showed the sym-
bol "T1 " or "T2
• Hideaway key for
day setting
Normal operation
Present temperature programmed
Appena alimentato, I'orologio parte dall'ora 00.00 di Lunedì, mentre
la corona di segmenti rappresenta un programma standard di utiliz-
zo in cui "T2 W " è la temperatura comfort, da mantenere nelle ore
in cui c'è più bisogno di caldo; "T1
economy, più bassa di T2, per i periodi della giornata in cui normal-
mente si è assenti oppure a dormire.
Abbassando l'antina si accede a tutti i comandi necessari alla pro-
" which indicates the programmed temperature.
• Hideaway key for
time setting
Present day
command indication
Time or room temperature
Flashing segment
correspondent to present time
PROGRAMMAZIONE
• Space batteries
• Knob to set T2 (comfort)
• Knob to set T1 (economy)
• Key to see time and room temperature
• Key to assign T1 to selected segment dur-
ing programming
• Key to assign T2 to selected segment dur-
ing programming
• Key to slide the days during programming
• Key to slide the time during programming
• Key On/Off
Programming day
Loader
Programmed
temperature in time
correspondent
to the flashing segment
Flashing segment selected
into programming
" è invece la temperatura
Programming