Advertisement
Quick Links
Advertisement
Related Manuals for Dancover SEMI PRO 7x7m
Summary of Contents for Dancover SEMI PRO 7x7m
- Page 1 PARTY TENT SEMI PRO 7x7 - 2,3M 06-02-2015-SH...
- Page 4 7x7m-2.3 PARTY TENT SEMI PRO 2188mm Ø50mm 2210mm Ø38mm 1700mm Ø50mm 1750mm 640mm 8PCS 27PCS 16PCS 8PCS 4PCS 4PCS 2PCS 2PCS 10 . 4PCS 4PCS 4PCS 2PCS 2PCS 4PCS 19.super peg 20.spiral peg M6x25mm M8x50mm 21.middle peg 22.small peg 24.Spanner 25.Screw 26.Wing nut 27.
- Page 5 7x7m-2.3 PARTY TENT SEMI PRO Select a at surface for the tent. Unpack the boxes and check if all listed parts are included. Assemble the roof frame by mounting parts 7-12 on the pipes (Parts 2 and 3). Use the screws to rmly attach the parts.
- Page 7 7x7m-2.3 PARTY TENT SEMI PRO Lift one side of the tent frame and attach the legs(1). Place the roof onto the frame and use the bungees to fasten it. Be sure not to put too much tension on the bungees in order not to make attaching the other side more di cult.
- Page 8 7x7m-2.3 PARTY TENT SEMI PRO Attach the sidewalls to the frame using the bungees. Velcro Attach the endwall directly to the roof with velcro. Connect the leg covers to the sidewalls and endwalls with velcro as shown. Use the short ground pegs to fasten the endwalls to the ground.