input voltage conditions. To obtain full output power (1770 W), connect the 8301AC power
supply to a 200–240 V AC nominal input voltage source.
When you configure an Ethernet Routing Switch 8300 system, you must consider total power
consumption to ensure proper system performance. The total input power consumption of the
components (modules and fan trays) must not exceed the output power rating of the 8301AC
power supply. For more information about the minimum number of power supplies to install
the Ethernet Routing Switch 8300 system, see
power supplies
For information about the specifications of the 8301AC power supply, see
8301AC power supply
Figure 1: 8301AC power supply
8302AC power supply
Figure 2: 8302AC power supply
power supply. The nominal input voltage range for the 8302AC power supply is 100–120 V AC
and 200–240 V AC. The output power is limited to 850 W maximum at 100–120 V AC nominal
input voltage conditions. To obtain full output power (1400 W), connect the 8302AC power
supply to a 200–240 V AC nominal input voltage source.
Installation — AC Power Supply
on page 22.
on page 43.
on page 24 shows an Ethernet Routing Switch 8302AC
Table 1: Recommended 8301AC or 8302AC
8302AC power supply
Specifications:
May 2011
23