Dc Power Cable Specifications; Regulatory Standards Compliance Specifications - Cisco Nexus 9364C Hardware Installation Manual

System Specifications
Part Number
CAB-HVDC-3T-2M
NO-POWER-CORD
Table 2: HVAC/HVDC Power Cables Callout Table

DC Power Cable Specifications

Power Supply
NXA-PDC-930W-PE (port-side
exhaust airflow)
NXA-PDC-930W-PI (port-side
intake airflow)
NXA-PDC-930W-PE (port-side
exhaust airflow)
NXA-PDC-930W-PI (port-side
intake airflow)
All except Argentina, Brazil, and
Japan

Regulatory Standards Compliance Specifications

The following table lists the regulatory standards compliance for the switch.
Cord Set Description
HVDC
6.6-foot (2.0 m) cable with
Saf-D-Grid and three terminal
connectors
All except Argentina, Brazil, and
Japan
No power cord included with
switch
1
Power Cord
(customer supplied)
CAB-48DC-40A-8AWG
NO-POWER-CORD
Cisco Nexus 9364C NX-OS Mode Switch Hardware Installation Guide
DC Power Cable Specifications
Photo
Not applicable
Connect this end to the power supply unit.
Cord Set Description
8 AWG insulated cable (10 AWG
minimum) for each power supply
8-AWG cable with 3-pin keyed
power supply connector and three
wires (power source connection)
No power cord included with
switch
55