Table of Contents
Advertisement
System Specifications
DC Power Cable Specifications
Power Supply
All except Argentina, Brazil, and
Japan
Note
For N2200-PDC-350W-B or N2200-PDC-400W DC power supplies
The terminal block used (2-position) accepts wire sizes 22AWG-14AWG.
For the maximum input current of approximately 15A, a 18AWG wire meets minimum requirements. 16AWG
adds some margin, and is recommended.
There is no earth ground connection on this input terminal block, thus the earth grounding is provided by the
system being grounded.
HVDC Power Cable Specifications
Type
HVDC
Power Cord
NO-POWER-CORD
Power Cord Part Number
CAB-HVDC-3T-2M
Cisco Nexus 3500 Hardware Installation Guide
DC Power Cable Specifications
Cord Set Description
No power cord included with
switch
Cord Set Description
6.6-foot (2.0 m) cable with
Saf-D-Grid and three terminal
connectors
39
Advertisement
Table of Contents
