Safety Equipment - Man E0834 LE312 Assembly Instruction Manual

Exhaust temperature sensor
(E0834 LE302/312/322 E0836 LE302)
Exhaust temperature sensor (E0836 LE202)
IMPORTANT!
The purpose of the sensors is to monitor important operating parameters.
Sensors that are not connected or are inoperative can lead to damage to the engine.
For this reason:
S Connect sensors to the engine monitoring system and check for proper operation.
5.9.3

Safety Equipment

WARNING!
Risk of death caused by the absence of safety equipment!
An emergency-off button, for shutting down the system or engine in an emergency, must be
installed for each engine.
For this reason:
S Install an emergency stop button to shut down the system in an emergency.
S Check whether all of the safety equipment is correctly installed and in good operating
order.
Carefully read the Assembly Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Installation
47