Valcom VIP-581A-IC Quick Start Manual

IP FlexHorn Surface Mount
INTRODUCTION
The VIP-581A-IC InformaCast Compliant IP
FlexHorn Surface Mount units enable
loudspeaker voice paging anywhere on an
Ethernet network. The VIP-581A-IC consists of a
network-connected high efficiency horn, in a
durable steel enclosure. Power is provided to the
VIP-581A-IC via a Power over Ethernet (PoE)
switch meeting the 802.3af specification.

SPECIFICATIONS

Access Methods

Singlewire InformaCast Server

SIP telephone system

Valcom M Cast Page Group
Features

Power over Ethernet (PoE) 802.3af
compatible

Angled surface mount

Paintable grille and enclosure
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
Dimensions/Weight

9.9" H x 12.2" W x 4.0" D (top) x
2.7" D (bottom)
(25.2cm H x 30.9cm W x 10.2cm D (top) x
6.9cm D (bottom)

Weight: 7.4 lbs. (3.4 kg)
VIP-581A-IC
InformaCast® Compliant
Environment
Interior Installation only
Temperature:
Humidity:
These products are intended for use with a UL
Listed power source marked "Class 2" or "LPS"
rated 24VDC, or 48VDC (PoE).
PoE and all interconnected ITE are intended for
intra-building.
Precautionary Designations

Class 3
•
•
•
1
0 to 85% non-precipitating
WARNING-To Reduce The Risk Of Fire Or
Electric Shock. Do Not Expose This
Apparatus To Rain Or Moisture.
AVERTISSEMENT - Afin de réduire les
risques d'incendie ou de décharge
électrique, évitez d'exposer le système à la
pluie ou à l'humidité.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
L'appareil ne doit pas être exposé à des
égouttements et éclaboussures et aucun
Objet Rempli de liquide, comme vase, ne
doit être place sur l'appareil.
ISSUE 1
0 to +40° C
947579