Configuring Authentication And Authorization For Accessing Ftp Server - H3C S3610 Series Operation Manual

Operation Manual – File System Management
H3C S3610&S5510 Series Ethernet Switches
To do...
Configure the
idle-timeout timer
Set the file update
mode in FTP
2.3.2 Configuring Authentication and Authorization for Accessing FTP
Server
To allow an FTP user to access certain directories on the FTP server, you need to
create an account for the user, authorizing access to the directories and associating the
username and password with the account.
Follow these steps to configure authentication and authorization for FTP server:
Enter system view
Create a local user and
enter its view
Assign a password to
the user
Assign the FTP service
to the user
Specify the directory
an FTP user can
access
Use the command...
ftp timeout minutes
ftp update { fast |
normal }
To do... Use the command...
system-view
local-user user-name
password { simple |
cipher } password
service-type ftp
[ ftp-directory
directory ]
work-directory
directory-name
Optional
30 minutes by default.
In idle-timeout time, if there is no
information interaction between
the FTP server and client, the
connection between them is
terminated.
Optional
Normal update is used by default.
—
Required
No local user exists by default,
and the system does not
support FTP anonymous user
access.
Required
Required
By default, the system does not
support anonymous FTP
access, and does not assign
any service. If the FTP service
is assigned, the root directory
of the device is used by default.
Optional
By default, the FTP/SFTP
users can access the root
directory of the device.
2-8
Chapter 2 FTP Configuration
Remarks
Remarks