Advertisement

Quick Links

IMPORTANT NOTICE
Before operating the unit, please read these instructions carefully.
Retain the manual for future reference.
You are advised to follow the instructions carefully when operating the unit.
Do not use any chemical solvent, clean agent or corrosive detergent to clean away dirt of the surface of the screen. By doing so,
you may cause irreversible damage to the surface of the TFT screen. To clean off dirt or fingerprints, we recommend the use of a
soft damp lens cleaning cloth.
Using spare parts from another manufacturer may cause permanent damage to the unit.
When operating the display unit, avoid touching or pressing the LCD glass panel. Excessive force may cause irreparable damage to
the LCD screen.
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a screen that is located in the motor
vehicle at any point forward of the back of the driver's seat, or that is visible, directly or indirectly, to the driver while operating the
vehicle. In the interesting of safety, this monitor should never be installed where it will be visible, directly or indirectly, by the operator
of the motor vehicle.
Lock the LCD screen in the fully closed position when not in use.
 Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome
lights can drain the vehicle's battery.
SDM107
1

Advertisement

Table of Contents
loading

Summary of Contents for Vizualogic SDM107

  • Page 1 Lock the LCD screen in the fully closed position when not in use.  Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights can drain the vehicle’s battery. SDM107...
  • Page 2: Main Features

    Left/Right 130°, Up/Down 45°/65° BRIGHTNESS: 250 NITS CONTRAST RATIO: 300:1 POWER SOURCE: DC 12V ( NEGATIVE GROUND) POWER CONSUMPTION: 20W ( Max.) OPERATING TEMPERATURE: 0℃~60℃ (32℉~140℉) STORAGE TEMPERATURE: -20℃~70℃(-4℉~158℉) DIMENSIONS (W x D x H): 335x280x45 mm NET WEIGHT: 3Kgs. (6.6lbs) SDM107...
  • Page 3: Dvd Player

    Support USB 1.1 Drive.  Equipped with USB Socket.  Plays MP3 music.  Applies to NTSC or PAL system. STANDARD ACCESSORIES PACKAGE CONTENTS  Remote control (CR2025 x 1 Lithium Battery)  Operating manual  Power connection cable SDM107...
  • Page 4: Controls And Connectors

    Plays DVD, SVCD, VCD, AUDIO CD and MP3 format.  A/V input jack: Connecting to your Game port or any A/V device. USB port DVD player IR transmitter A/V input jack Dome lights Dome lights switch Buttons Panel lock Eject Key SDM107...
  • Page 5: Monitor Function Descriptions

    SOURCE button Press to enter the GAME input mode. POWER button Press this button to turn on the monitor, press again to turn off the monitor. DVD button Press DVD button to play DVD or change to USB Mode. SDM107...
  • Page 6: Dvd Function Descriptons

    Press this button to active the play mode while a disc is loaded into the disc compartment. 19. RIGHT button 20 21 22 20. PREVIOUS button Allows the user to return to the previous chapter or track. 21. DOWN button 22. NEXT button Allows the user to skip to the next chapter or track. SDM107...
  • Page 7 Press to display DVD disc current information. 23 24 25 31. ZOOM button` Allows the user to zoom in or zoom out the image, press the “LEFT/RIGHT/UP/DOWN” buttons to move the zoomed image to move in the direction of the remaining portion of the image. SDM107...
  • Page 8 40. DOWN button 36~40 41. STOP button USB media file play will be stopped. 42. PAUSE button 41 42 43 Allows the user to pause the play of “MUSIC” or “VIDEO” file. 43. ENTER button Press this button to confirm selection. SDM107...
  • Page 9: Monitor Operation

     “FM PRESET”: press the “▲” button to select M1 ~ M6; press “▼” button 1 sec. to change present FM channel or press “▼” button more than 2 sec. to cover and save a new FM channel. SDM107...
  • Page 10 NOTE: The On Screen Display will show “INVALID DISC” if the disc region code does not correspond with the unit setting.  Press the “PAUSE” button to pause, press the “PLAY’ button to resume play.  Press the “STOP” button to stop play. SDM107...
  • Page 11 To exit setup menu, press SETUP button on the remote again. OSD (ON-SCREEN DISPLAY) LANGUAGE MENU The OSD Language Menu allows the user to select the language for the on-screen display. Press SETUP and then use the ( ▼ ▲ ) button to select the desired language. SDM107...
  • Page 12 SDM107...
  • Page 13: Audio Setup

    AUDIO SET UP Press the SETUP button and select AUDIO. The AUDIO SETUP allows you to change the speaker setup and HDCD. Press ( ▼ ▲ ) button to select. SDM107...
  • Page 14 SDM107...
  • Page 15: Video Setup

    VIDEO SET UP Press the SETUP button and select VIDEO. The VIDEO SETUP allows you to change the quality. Press ( ▼ ▲ ) button to select. SDM107...
  • Page 16 SDM107...
  • Page 17: Preference Setup

    PREFERENCE SET UP THIS SETTING HAVE TO STOP PLAYING DISC. Press the SETUP button and select Preference. The Preference SETUP allows you to change the quality. Press ( ▼ ▲ ) button to select. SDM107...
  • Page 18 SDM107...
  • Page 19 SDM107...
  • Page 20: New Password Set Up (Parental Control Password)

    NEW PASSWORD SET UP (PARENTAL CONTROL PASSWORD) Press the SETUP button and select PASSWORD. The PASSWORD SETUP allows you to change the parental control password. Press and then press number and then Enter to implement it. SDM107...
  • Page 21: Playing Audio Cds

    REP-ONE-repeats the track that is playing.  REP-ALL-repeats the disc that is playing.  REPEAT OFF. The repeat option changes every time REPEAT is pressed. When the track/tracks has/have ended, the selected repeat option loops repeatedly unit you turn it off. SDM107...
  • Page 22: Playing Mp3 Discs

    Press the up or down arrow button to go through the song list and highlight the song you want. Press Enter to begin playback of the highlighted song. SKIPPING SONG Use the next ( ) button on the remote control to move to the next song. Use the Previous ( ) button to move the beginning of the SDM107...
  • Page 23  Shuffle.  Random. USB 1.1 DRIVE OPERATION USB Socket A/V Input Jacks  Insert a USB 1.1 Drive into the proper socket as shown on the above figure. Use caution when inserting Digital Media Card into the port. SDM107...
  • Page 24: Other Information

    This monitor includes a built in Wireless IR transmitter, for use with our wireless headphones (Part number: 90-3095). The volume can be adjusted using the controls on screen. The wireless headphones must be used within a line of sight from the transmitter, as infrared transmissions like visible light travel only in a straight line. SDM107...
  • Page 25 LIMITED THREE-YEAR WARRANTY (NON-TRANSFERABLE) Vizualogic, LLC warrants to the original purchaser a non- transferable warranty to repair or replace, free of charge, the video product(s) in materials and workmanship under normal use and conditions for a period of three (3) years from date of purchase.
  • Page 26: Troubleshooting

    -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. SDM107...
  • Page 27 -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The user should not modify or change this equipment without written approval from CENEC CORP. Modification could void authority to use this equipment. NOTES SDM107...
  • Page 28 NOTES SDM107...
  • Page 29 SDM107...

Table of Contents