NEC MultiSync LCD1510+ User Manual page 8

E - 6
•
Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution, glass cleaner or tissue
paper.
•
For optimum performance, allow 20 minutes for warm-up.
•
Avoid displaying fixed patterns on the monitor for long periods
of the time to avoid image persistence (after-image effects.)
•
Avoid applying pressure to the LCD monitor surface.
Immediately unplug your monitor from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled or objects have fallen into the monitor.
•
If the monitor has been exposed to rain or water.
•
If the monitor has been dropped or the cabinet is damaged.
•
If the monitor does not operate normally by following operating
instructions.
CAUTION:
•
Allow adequate ventilation around the monitor so that heat can
properly dissipate. Do not block ventilated openings or place
the monitor near a radiator or other heat sources. Do not put
anything on top of monitor.
•
The power cable connector is the primary means of detaching
the system from the power supply. The monitor should be
installed close to a power outlet which is easily accessible.
•
Use caution when carrying the monitor, as the compact stand
may extend automatically.
•
Handle with care when transporting. Save packaging for
transporting.
78134712 20
Recommended Use
99/11/16, 3:44 PM