Optional: Connecting To An Audio System; Stereo System Has Dolby Pro Logic Or Right / Left Audio In Jack; Optional: Connecting Digital Av Receiver; Receiver Has A Pcm, Dolby Digital, Or Mpeg2 Decoder - Philips DVP5960/37B User Manual

Connections
Optional: Connecting to an
Audio System
STEREO
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
14
001-51 DVP5960_Eng_37_RC3
Optional: Connecting Digital AV
Receiver
AV Receiver
OPTICAL
AUDIO
IN
DIGITAL
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3
Set the DVD Player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 37
"Digital Output").
Helpful Hints:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
14
AUDIO
IN
DIGITAL
05/07/06, 3:59 PM