Optional: Connecting A Supported Usb Devices; Using Usb Port - Philips DVP5960/37B User Manual

Connections
Optional: Connecting a
supported USB devices

Using USB port

You can only view the content of
following supported USB devices through
this DVD system. Editing the data and
recording to a DVD+R/+RW are not
possible.
1
Connect the supported USB device
directly to the USB port on the front
panel (as shown on the above illustration).
2
Press USB button on the remote control
in order to view the files stored in the
supported USB device.
3
You have to stop playback before
removing the supported USB device from
the USB port.
16
001-51 DVP5960_Eng_37_RC3
(optional accessory - not supplied)
Helpful Hints:
– The USB port only supports to the
USB1.1 and the playback of the JPEG/MP3/
WMA.
– The USB port is hot swappable and able
to read from the following devices: {Thumb
drive or flash drive, Card readers for
different kinds of cards, Portable hard
disk and MP3 players}.
– If a non-supported USB device is plugged
in, the player will display not supported
device.
– If the USB device does not fit into the
USB port, a USB extension cable is required.
16
USB extension cable
05/07/06, 3:59 PM