Selecting The Color System That Corresponds To Your Tv - Philips DVP5960/37B User Manual

Hdmi divx dvd player video upscaling up to 1080i
Hide thumbs Also See for DVP5960/37B:
Table of Contents

Advertisement

Selecting the color system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the color system of
the Disc, the TV and the DVD Player
should match.
1
Press SETUP.
2
Press 2 to select {VIDEO SETUP PAGE}.
3
Press 3 4 to highlight {TV TYPE}, then
press 2.
4
Press 3 4 to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc and output in NTSC
format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
001-51 DVP5960_Eng_37_RC3
5
Select an item and press OK.
Follow the instructions shown on the
TV to confirm the selection (if any).
Helpful Hints:
Before changing the current TV
Standard setting, ensure that your TV
supports the 'selected TV Type' system.
If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
To reset to default TV color system
manually:
G
Wait for 15 seconds for auto recovery.
OR
1
Press OPEN CLOSE
player to open the disc tray.
2
Press numeric keypad '3' on the
remote control for few seconds.
The DVD background screen appears
on the TV.
21
Getting Started
0
on the DVD
05/07/06, 3:59 PM
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents