Table of Contents
Advertisement
DVD Setup Menu Options
CD Upsampling
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
automatically switch to stereo mode.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {CD UPSAMPLING}, then press 2.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
Helpful Hint:
–
CD upsampling feature is only applicable
to stereo output setting.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
38
001-51 DVP5960_Eng_37_RC3
Night Mode - turning on/off
In this mode, the high volume outputs are
softened. It is useful for watching your
favorite action movie without disturbing
others at night.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {NIGHT MODE}, then press 2.
ON
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
OFF
Select this when you want to enjoy the
surround sound with its full dynamic
range.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
38
05/07/06, 4:00 PM
Hide quick links:
Advertisement
Table of Contents
