Progressive - Turning On/Off; Picture Setting - Philips DVP5960/37B User Manual

DVD Setup Menu Options

Progressive - turning on/off

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player's Y Pb Pr jacks
to your TV that supports the progressive
video input. Otherwise, a distorted
picture will appear on the TV. For proper
progressive scan set up, see page 20.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PROGRESSIVE}, then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
➜
Follow the instructions shown on the
TV to confirm the selection (if any).
➜
If a distorted picture appears on the TV
screen, wait for 15 seconds for auto
recovery.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
40
001-51 DVP5960_Eng_37_RC3

Picture Setting

This DVD Player provides three
predefined sets of picture color settings
and one personal setting which you can
define yourself.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PICTURE SETTING}, then press
2.
STANDARD
Select this for standard picture setting.
VIVID
Select this to make the TV picture
brighter.
COOL
Select this to make the TV picture softer.
PERSONAL
Select this to personalise your picture
color by adjusting the brightness, contrast,
tint and color (saturation).
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
3
If you select {PERSONAL}, then proceed
to steps
➜
The 'personal picture setup' menu
appears.
40
4 7
~ .
05/07/06, 4:00 PM