YANYU ITX-K100 User Manual page 33

ITX-K100
Base on Intel® Bay Trail platform Mini-ITX motherboard
with the System that made it cant continue to work, Reset and it can make the
system work again.
(4) Power switch control（the 6th,8th POWER BUTTON）The two pin connected
to the bounce switch on the front panel of the chassis ,and then it can be used to
connect or cut off the power.
2.6.11 P
ROGRAMMABLE INPUT
Please Write normal GPIO driver under OS（windows Series please refer to the
information of related Microsoft Driver, Linux, UNIX. please refer to the related Linux
Driver framework model）,use GPIO driver to make GPIO move, The following is
called a driver.
GPIO1 Combined with 5 group （10pin） （refer to motherboard） ,the 1,2,3,4,5,6,7,8
pin leading Simple GPIO,9th pin is VDD,10th is VCC, and singular number (1,3,5,7)
is signal Input pin, Even number (2,4,6,8) is signal Output pin :
/ (GPIO1)
OUTPUT PORT
- 32 -
GPIO1