Installation Steps; Install Memory - YANYU ITX-K100 User Manual

ITX-K100
Base on Intel® Bay Trail platform Mini-ITX motherboard
Tips:
How to identify the alarms: (Long beep indicates system memory error; Short beep
indicates the computer is power on).
LVDS screen working voltage support 3.3V、5V、12V voltage output, default is
3.3V, before using LVDS, please understand the requirements of the working
voltage and then set.
2.3 I
NSTALLATION
Please follow below steps to assemble your computer:
1．Adjust all jumpers onboard based on user manual.
2．Install other expansion cards.
3．Connect all signal lines, cables, panel control circuit and power adapter.
4．Start up computer and finish BIOS settings.
Key components of this motherboard are Integrated circuit and these
components could be easily damaged by electrostatic influence. So, before install
motherboard, please always keep following precautions in mind.
1．Hold the board by edges, please don't touch any components or pin of plug &
socket.
2 ． Wear anti-static gloves/wrist strap while touching the integrated circuit
components, such as CPU,RAM etc.
3．Put those unused or uninstalled components in static shielding bags or trays.
4．Please first check the power switch is off before connecting the power plug.
2.4 I M
NSTALL EMORY
The motherboard provides 1*SODIMM Slot. Please refer to the following steps to
install your memory bank:
1． First, please align the notch of the memory bank with the alignment mark on the
socket and press the memory bank slowly into the socket.
2．Please choose the proper memory bank that matches the motherboard.
S
TEPS
- 13 -