Jpw1Jumper Settings - YANYU ITX-K100 User Manual

ITX-K100
Base on Intel® Bay Trail platform Mini-ITX motherboard
JBAT1 jumper settings：
Settings
1-2
2-3
Clear the CMOS content, all the BIOS settings are returned to the factory
Do not clear CMOS when the computer is power on, otherwise, it will cause
damage to the motherboard !
2.5.2 JPW1
JUMPER SETTINGS
Settings
1-2 shorted
Closed Auto Power On(restore on AC Power Loss)
2-3shorted
Open Auto Power On(restore on AC Power Loss)
2.5.3 SATA2、SATA5 interface function setting（SATA1_SW1）
SATA1_SW1 definition：
Settings
Shorted 1-2\4-5\7-8\10-11 at the same time shorted connector to the default
JBAT1
Normal Status, system default setting
:
JPW1
SATA1_SW1
SATA2 hard disk interface
- 15 -
JBAT1
SATA1_SW1
JPW1