Usb Configuration - YANYU ITX-K100 User Manual

ITX-K100
Base on Intel® Bay Trail platform Mini-ITX motherboard
3.2.10 USB C
ONFIGURATION
Legacy USB Support ：
The old version of the USB settings, if you need to support USB devices in DOS,
such as U disk, USB keyboard, etc., will be set to [Enabled] or [Auto]. on the contrary,
the choice of [Disabled].
XHCI Hand-off ：
When the operating system does not support XHCI, whether to allow the XHCI to
take over BIOS control
USB Mass Storage Driver Support ：
USB large capacity storage device support switch.
USB Transfer time-out ：
USB transmission timeout: set control, bulk, interrupt transfer timeout. Default is 20
seconds.
Device reset time-out ：
Device reset timeout: set the bulk USB disk boot command timeout. Default is 20
seconds. Device Power-up Delay ：
Equipment power delay: set the USB device to the main controller to report the
maximum delay time.
- 45 -