Operating Wvep916Sc - Westinghouse WVE915SC User Manual

USING YOUR OVEN

Operating WVEP916SC

Setting the time
Before the appliance, can be used, the time must be set.
When power is supplied to the oven the
be displayed. Along with the clock symbol the '12' will be
flashing. This indicates that 'hour' portion of the time is
ready to be changed.
Toggle the temp selector
you have the right hour.
The minutes will flash and can be set in the same manner.
5 seconds after the last change, the clock display will stop
flashing, confirming that the time has been set.
NOTE: The clock has a 24 hour display.
Select the oven function
Turn the oven function selector clockwise to select
the desired oven function. The default temperature
for that function will be shown on the display.
5 seconds after the last change, the oven will begin heating
and the "Elapsed time" commences on the display.
NOTE: each oven function has a default temperature
which can then be adjusted as outlined below.
Selecting the oven temperature
Toggle the temperature selector left ( ) or right ( )
as required to set the desired cooking temperature.
The temperature setting changes in increments of 5°C.
The set temperature is displayed for 5 seconds from
the last change.
NOTE: the temperature can be adjusted at any time
throughout the cooking time.
(continued)
clock icon will
or , then touch when
This knob cannot be
turned anticlockwise
from o position
Cooking with the timer
1
11
10
9
8
1
On when the timer is set
2
On when oven warming up
3 3 bars displayed when oven
reaches set temperature
4 On when oven cooling down
5 Oven door locked
6 Touch to toggle through cooking
time & oven set temp
7 Touch to toggle through the timer modes
8 Touch to start timer mode.
Hold to turn oven light on/off
9 End time icon
10 Cook time icon
11
Time of day icon
Setting the cook time
1. Use the knobs to select the desired oven function
and cooking temperature.
2. Touch the button as often as necessary, until
the 'cook time' symbol appears.
3. Set the desired cooking time commencing with
minutes by using or
flashing, then touch the
the hours by using or
the last time adjustment the
flashing. The appliance is now programmed and
the display will countdown to zero.
4. When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the
oven function selector to OFF.
NOTE: Cooking time cannot be set for the Rapid
Heat function.
The feature can be cancelled at any time by returning
the function selector to OFF.
2
6
7
, whilst the symbol is
button again and set
. After 5 seconds from
symbol will stop
USING YOUR OVEN
3
4
5
19