Table of Contents
Advertisement
23
FG7C CONTROLLER
Document Revision History
identical to the mapping in the third party software, the system would not change due to the
communication break.
If the AbsoluteIO option has been ticked under the system tab the third party software would still
have control but if the communication to the FG7 fails then control would be given to the
mapping of the inputs of the IO card(s) and not to the FG7 User (see AbsoluteIO).
Please also read the section Failsafe of this manual if third party integration or Nemtek
FenceProbe is used.
DOCUMENT REVISION HISTORY
Revision 1.0
26 April 2018
Revision 1.1 Added Failsafe
24 May 2018
Revision 1.2 Removed calibration
6 June 2018
Revision 1.3 Removed uploads via flash drive added comment on node and tautwire
End of document
Advertisement
Table of Contents
Need help?
Do you have a question about the FG7C and is the answer not in the manual?
Questions and answers