IKA KMO 3 basic Operating Manual
Hide thumbs Also See for KMO 3 basic:

Advertisement

Quick Links

KMO 3 basic

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KMO 3 basic and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IKA KMO 3 basic

  • Page 1 KMO 3 basic...
  • Page 2: Device Setup

    Device setup Safety instructions /// KMO 3 basic /// About our warning symbols Indicates an imminently hazardous situation, which, if not avoided, will result in death, serious injury. Indicates a potentially hazardous situation, which, if not avoided, can result in death, serious injury.
  • Page 3: General Information

    /// Permissible medium / contaminants / side reactions › Read the operating manual in its entirety before using the KMO 3 basic and follow the safety instructions. › Keep the operating manual in a location that is easily Warning! ( ) accessible by everyone in the laboratory.
  • Page 4 /// Procedures during sample runs /// Power supply / Switching off Warning! ( ) Place the power supply outside the working area of the device. Wear your personal protective equipment in accordance with the hazard › The voltage stated on the ratings plate must correspond to category of the media to be processed.
  • Page 5: Proper Usage

    › The device may only be opened by qualified Usage and IKA approved technicians. › The KMO 3 basic magnetic stirrer has been › Do not cover the device, even partially e.g. with designed for mixing liquids. metallic plates or film. This may result in overheating.
  • Page 6: Operation

    Start-up /// Operation Check whether the voltage given on the ratings plate corresponds to the Stirring available mains voltage. If these conditions have been met, the device is The stirring function is started and stopped by pressing ready for operation when the power supply is plugged in. If these conditions the “Start / Stop“...
  • Page 7 /// Automatic reverse rotation /// Set-up plate illuminated To activate the “Reverse rotation” function, press the “Reverse rotation” The illumination brightness can be adjusted by pressing the “Set-up plate button (I). When the “Reverse rotation“ function is switched on, a decimal illuminated“...
  • Page 8: Technical Data

    Technical data /// KMO 3 basic in detail Technical data KMO 3 basic KMO 3 basic Dimensions (W × H × D) 153 × 62.5 × 227 mm Nominal voltage DC 24 / 500 mA Weight 1.2 kg Power input...

Table of Contents