Midplane Connectors; Serial Ports 1 And - Cisco VCO/4K Mechanical Assemblies

Hide thumbs Also See for VCO/4K:

Table of Contents

Description

3.3 Midplane Connectors

The Storage/Control I/O Module plugs into the midplane through standard DIN 41612

triple-row, 96-pin male connectors.

Serial Port 1/Console and Serial Port 2/TTY01 are dedicated ports for connecting the system

master console and remote maintenance modem, respectively. These standard female DB-25

ports connect to the console and modem via EIA/TIA-232 cables. Table 1 shows the pin and

signal assignments for these ports. For additional information on connecting peripheral

equipment, refer to the Cisco VCO/4K Hardware Installation Manual.

1-6

Cisco VCO/4K Mechanical Assemblies

E2mid140.pict

Figure 4: The Control Midplane

A-side connector for the

Storage/Control I/O Module

B-side connector for the

Storage/Control I/O Module

Table of Contents