Siemens M20 Terminal Technical Description page 76

Siemens Information and Communication Products
AT+CPBW Write phonebook entry
Test command Response
AT+CPBW=? TA returns location range supported by the current storage, the maximum length of <number>
field, supported number formats of the storage, and the maximum length of <text> field.
Note:
formation, the format list should be empty parenthesis.
+CPBW: (list of supported <index>s), <nlength>, (list of supported <typ>s), <tlength> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
see execute command
Execute command Response
AT+CPBW = [<in- TA writes phonebook entry in location number <index> in the current phonebook memory storage
dex>], [<number>, selected with +CPBS. Entry fields written are phone number <number> (in the format <type>)
[<type>, [<text>]]] and text <text> associated with the number. If these fields are omitted, phonebook entry is deleted.
If <index> is left out, but <number> is given, entry is written to the first free location in the pho-
nebook (see note for MT phonebook). The string <number> may also contain letters, these are
stored as capitals.
Note:
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<nlength>
<tlength>
<index>
<number>
<type>
<text>
Note:
Reference Note
GSM 07.07 In case of MT phonebook this command works equal. But take care in which physical phonebook
the entry is written: Unless the ME phonebook is full, the entry is written in the ME phonebook. If
the ME phonebook is full, the entry is written in the SM phonebook. ME Phonebook data is only
stored if unit is shut down using the
Version 8 dated 15.03.00
the lengths may not be available in case of SIM storage. If storage does not offer format in-
PIN2 is necessary for writing in FD phonebook.
max. length of phone number
max. length of text for number
location number
phone number
type of number; e.g. 145 when dialling string includes international access code cha-
racter "+", otherwise 129
text for phone number
the following characters in <text> must be entered via the escape sequence:
GSM char.
\
35 43
"
32 32
BSP
30 38
NULL
30 30
'0' (GSM null) may cause problems on application level when using the
function (strlen) and should thus be represented by an escape sequence when
necessary
Seq. Seq.(hex)
Note
\5C 5C
(backslash)
\22 5C
(string delimiter)
\08 5C
(backspace)
\00 5C
(GSM null)
"AT^SMSO Switch off mobile station turn off"
AT command interface
command.
A
76