Siemens M20 Terminal Technical Description page 52

Siemens Information and Communication Products
AT+ILRR Set TE-TA local rate reporting mode
Test command Response
AT+ILRR=? +ILRR: (list of supported <value>s) OK
Parameter
see set command
Read command Response
AT+ILRR? +ILRR: <value> OK
Parameter
see set command
Set command Response
AT+ILRR= This parameter setting determines whether or not an intermediate result code of local rate is repor-
<value> ted at connection setup. The rate is applied after the final result code of the connection is transmitted
to TE.
OK
Parameter
<value>
Intermediate result
+ILLR:<rate>
Note:
Parameter
<rate>
Reference Note
V.25ter
Version 8 dated 15.03.00
0 Disables reporting of local port rate
1 Enables reporting of local port rate
It indicates port rate settings on connection.
port rate setting on call connection in bauds per second
300
1200
2400
4800
9600
19200
28800
38400
57600
AT command interface
A
52