Additional Information; Update Software; Update Software Via Usb - Philips BDP7500S2/12 User Manual

On the connected USB flash drive, a folder named
"BUDA" is automatically created to store the
downloaded BD-Live data..
[Local Storage]
Select a location for downloaded BD-Live data to
be saved.
• [Internal] - Save the download on the internal
memory of this player.
• [External] - Save the download on the
connected USB flash drive.
®
[DivX VOD Code]
Obtain the DivX ® registration code or the
deregistration code.
Tip
•
Use this product's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.
[Version Info.]
Display the software version and the MAC address
of this product.
Tip
•
This information is needed for you to check if a latest
software version is available at the Philips website so that
you can download and install on this product.
[Restore Default Settings]
Reset all the settings of this product to the factory
settings, except for [Parental Control] setting.
26 EN

7 Additional Information

Update software

For software updates to enchance performance,
check the current software version of this product to
compare with the latest software (if available) at the
Philips website.
1
2
3
Update software via network
1
2
®
VOD
3

Update software via USB

1
2
3
4
5
•
Press .
Select [Setup], and press OK.
Select [Advanced] > [Version Info.], and press
OK.
Set up the internet connection (see
"Get started' > "Set up a network").
In the Home menu, select [Setup] >
[Advanced] > [Software Update] >
[Network].
»
You are prompted to start upgrading
process if upgrade media is detected.
Follow the instructions on the TV screen to
confirm update operation.
»
Once software update is complete, this
product automatically turns off to standby.
Go to www.philips.com/support to check if
the latest software version is available for this
product.
Download the software into a USB flash drive:
a Un-zip the download, and make sure that
the un-zipped folder is named "UPG_
ALL".
b Put the "UPG_ALL" folder in the root
directory.
Insert the USB flash drive to the
jack on the front panel of this product.
In the Home menu, select [Setup] >
[Advanced] > [Software Update] > [USB].
Follow the instructions on the TV screen to
confirm update operation.
»
Once software update is complete, this
product automatically turns off to standby.
Note
Do not turn off the power or remove the USB flash
drive when software updating is in progress to prevent
possible damage of this product.
(USB)