Connect a USB device
Connect a USB device to the
on the front panel of this product.
, and select [browse USB] in the menu to access
the content and play the ﬁles.
Connect a USB device only to the
panel of this product.
Philips does not guarantee compatibility with all USB
Connect a network
With a wired or wireless connection (see "Get
started" > "Set up a network"), you can connect
this product to:
the Internet (for software update/BD
Live/Net TV service).
or a home network (to access media ﬁles
from a DLNA media server, e.g. PC).
Internet access to Philips website for software update
may not be allowed, depending on the router you use
or the Internet Service Provider's policy. Contact your
Internet Service Provider for more information.
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
completed all other connections.
The type plate is located on the back of the product.
Connect the AC power cable to:
the wall socket.
This product is ready to be set up for use.
jack on the front
4 Get started
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
Prepare the remote control
Press and push the battery compartment to
slide it open (see "1" in the illustration).
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Push and slide back the battery compartment
(see "3" in the illustration).
If you are not going to use the remote control for a long
time, remove the batteries.
Do not mix batteries (old and new or carbon and
Batteries contain chemical substances, so they should be
disposed of properly.
Find the TV input
to turn on this product.
Turn on the TV and switch to the video input
(refer to the TV user manual on how to select
the A/V input).
Use the Home menu