⇒ F ig. 180
– Remove connector
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Main beam lights
Safety First
from the bulb.
2
⇒ F ig. 180
pressing inwards to the
3
Fig. 181 Main beam
headlights
Operating Instructions
– Raise the bonnet.
⇒ F ig. 181
– Remove the cover
⇒ F ig. 182
– Remove connector
⇒ F ig. 182
– Press the spring
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation involves the above steps in reverse sequence.
Practical Tips
If and when
Fig. 182 Main beam
headlights
by pulling on this.
C
from the bulb.
1
inwards and to the right.
2
Technical Specifications
265