Seat ALTEA FREETRACK Owner's Manual page 159

Heating and cooling the interior
Interior heating
– Turn the temperature selector
the required temperature.
– Turn the blower switch to one of the settings 1-4.
– Set the air distribution control to the air flow configuration de-
sired: (towards the windscreen),

(towards the footwell) and
footwell areas).
Interior cooling
– Switch on the air conditioner using the button
– Turn the temperature selector anticlockwise until the desired
cooling output is reached.
– Turn the blower switch to one of the settings 1-4.
Safety First
⇒ F ig. 127
clockwise to select
1
(towards the chest),
 
(towards the windscreen and

⇒ F ig. 126
.
AC
Operating Instructions
Fig. 127 On the dash panel: Climatic controls
– Use the air distribution control to guide the flow of air in the re-
quired direction: (to the windscreen),

body), (to the footwell) and

footwell).
Heating
Maximum heat output, which is needed to defrost the windows quickly, is
only available when the engine has reached its operating temperature.
Air conditioner
When the air conditioning system is switched on, not only the temperature,
but also the air humidity in the vehicle interior is reduced. This improves
comfort for the vehicle occupants and prevents misting of the windows
when the ambient air humidity is high.
If the air conditioning system cannot be switched on this may be caused by
the following reasons:
Practical Tips
Air conditioning
(to the upper

(to the windscreen and to the


Technical Specifications
157