Seat ALTEA FREETRACK Owner's Manual page 186

184 Driving
Switching off the cruise control system
– Either push the switch
off when the vehicle is stationary.
When the cruise control is on and a speed is programmed, the indicator 
on the instrument panel is lit.
If the cruise control system is switched off, the  symbol is switched off.
The system will also be deactivated completely when 1st gear is selected.*
Setting speed*
– Press the lower part SET/- of the rocker switch
once briefly when you have reached the speed you wish to set.
1)
Depending on the version of the model.
to the right to OFF or turn the ignition
B
1)
Fig. 149 Turn signal and
main beam headlight lev-
er: switch and rocker
switch for the cruise con-
trol
⇒ F ig. 149
When you release the rocker switch, the current speed is set and held con-
stant.
Adjusting set speed*
The speed can be altered without touching the accelerator or
the brake.

Setting a higher speed
– Press the upper part RES/+ of the rocker switch
increase the speed. The vehicle will continue to accelerate as
long as you keep the rocker switch pressed. When you release
A
the switch, the new speed is stored.

Fig. 150 Turn signal and
main beam headlight lev-
er: switch and rocker
switch for the cruise con-
trol
⇒ F ig. 150
to
A
